Purchase of 304 stainless steel head, Hebei Cang Sheng Pipe most professional stainless steel head, stainless steel head, the lowest price stainless steel head material: 304,304L, 321,316,316L, 310S, 00Cr18Ni5Mo3Si2 (UNS S31500) (3RE60), 630, 00Cr22Ni5Mo3N (UNS S31803 / S32205) (SAF2205), 00Cr25Ni7Mo4N (UNS S32750) (SAF2507) 304,1Cr13,2Cr13,3Cr13,1Cr17Ni2, duplex steel, antibacterial steel and other materials. Common standards: JB / T4746-2002 GB / T12459-2005 GB / T13401-2005 Our company specializes in the production of stainless steel head, stainless steel head range, 304 conical stainless steel head quality assurance body conical head, cone section under the action of internal pressure, the maximum stress occurs at the big end of the film. Cone and cylindrical portion connection DN1000 * 10 stainless steel head, due to the geometric discontinuity, the radius of curvature of the mutation, so the department will have a greater lateral thrust, causing a larger edge stress, prone to bending, so be strengthened. On the big end, the axial bending stress as the main controlling factor DN850 * 9 stainless steel head price, and is owned by secondary stress, the stress intensity control, including; on the small end, due to the small end of the stress state of the junction of the main cylinder for The average circumferential tensile stress and the average radial compressive stress, is a local film stress, the stress intensity can be controlled, including, but due to the local film stress distribution here may be beyond the scope of the edge effect, for safety reasons, to take control of the stress intensity within. On the big end, section thickness strengthen any case shall not be less than the thickness of the shell is connected to the cone, strengthening segment length should not be less than DN950 * 10 stainless steel head test, the cylinder length should not be less than strengthen. On the small end, section thickness strengthen any case shall not be less than the thickness of the shell is connected to the cone, cone shell length should not be less than strengthen, strengthen the cylinder length should not be less than. DN800 * 8 stainless steel head Aba manufacturers _ _ Cang Sheng stainless steel head pipe provided Cang Sheng Hebei Pipe Manufacturing Co., Ltd. from. Cang Sheng Hebei Pipe Manufacturing Co., Ltd. (www.csyrb.com) (www. Hbcsgj.com) strong, credible, Hebei Cangzhou elbow industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Cang Sheng fittings and you hand in hand into the brilliant, for a better future!